Update README.md

Updated to my repo

.github/ISSUE_TEMPLATE/bug_report.md

@@ -9,6 +9,13 @@ assignees: ''
 
 <!-- Any bug report not following this template will be immediately closed. Thanks -->
 
+## Before Reporting an Issue
+- I have read the kickstart.nvim README.md.
+- I have read the appropriate plugin's documentation.
+- I have searched that this issue has not been reported before.
+
+- [ ] **By checking this, I confirm that the above steps are completed. I understand leaving this unchecked will result in this report being closed immediately.**
+
 ## Describe the bug
 <!-- A clear and concise description of what the bug is. -->
 
@@ -18,8 +25,8 @@ assignees: ''
 
 ## Desktop
 <!-- please complete the following information. -->
-- OS: 
-- Terminal: 
+- OS:
+- Terminal:
 
 ## Neovim Version
 <!-- Output of running `:version` from inside of neovim. -->

.github/pull_request_template.md

@@ -0,0 +1,8 @@
+***************************************************************************
+**NOTE**
+Please verify that the `base repository` above has the intended destination!
+Github by default opens Pull Requests against the parent of a forked repository.
+If this is your personal fork and you didn't intend to open a PR for contribution
+to the original project then adjust the `base repository` accordingly.
+**************************************************************************
+

README.md

@@ -21,34 +21,57 @@ If you are experiencing issues, please make sure you have the latest versions.
 
 ### Install External Dependencies
 
-> **NOTE** 
-> [Backup](#FAQ) your previous configuration (if any exists)
-
 External Requirements:
 - Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`)
 - [ripgrep](https://github.com/BurntSushi/ripgrep#installation)
+- Clipboard tool (xclip/xsel/win32yank or other depending on the platform)
+- A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons
+  - if you have it set `vim.g.have_nerd_font` in `init.lua` to true
 - Language Setup:
-  - If want to write Typescript, you need `npm`
-  - If want to write Golang, you will need `go`
+  - If you want to write Typescript, you need `npm`
+  - If you want to write Golang, you will need `go`
   - etc.
 
 > **NOTE**
-> See [Windows Installation](#Windows-Installation) to double check any additional Windows notes
+> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes
+> and quick install snippets
+
+### Install Kickstart
+
+> **NOTE**
+> [Backup](#FAQ) your previous configuration (if any exists)
 
 Neovim's configurations are located under the following paths, depending on your OS:
 
 | OS | PATH |
 | :- | :--- |
 | Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
-| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
+| Windows (cmd)| `%localappdata%\nvim\` |
+| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
 
-Clone kickstart.nvim:
+#### Recommended Step
+
+[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo
+so that you have your own copy that you can modify, then install by cloning the
+fork to your machine using one of the commands below, depending on your OS.
+
+> **NOTE**
+> Your fork's URL will be something like this:
+> `https://github.com/<your_github_username>/kickstart.nvim.git`
+
+You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file
+too - it's ignored in the kickstart repo to make maintenance easier, but it's
+[recommended to track it in version control](https://lazy.folke.io/usage/lockfile).
+
+#### Clone kickstart.nvim
+> **NOTE**
+> If following the recommended step above (i.e., forking the repo), replace
+> `nvim-lua` with `<your_github_username>` in the commands below
 
 <details><summary> Linux and Mac </summary>
 
 ```sh
-git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
+git clone git@code.draft13.com:robert/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
 ```
 
 </details>
@@ -58,13 +81,13 @@ git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HO
 If you're using `cmd.exe`:
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\ 
+git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim"
 ```
 
 If you're using `powershell.exe`
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\ 
+git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
 ```
 
 </details>
@@ -78,117 +101,138 @@ nvim
 ```
 
 That's it! Lazy will install all the plugins you have. Use `:Lazy` to view
-current plugin status.
+the current plugin status. Hit `q` to close the window.
+
+#### Read The Friendly Documentation
 
 Read through the `init.lua` file in your configuration folder for more
-information about extending and exploring Neovim.
+information about extending and exploring Neovim. That also includes
+examples of adding popularly requested plugins.
+
+> [!NOTE]
+> For more information about a particular plugin check its repository's documentation.
+
 
 ### Getting Started
 
-See [Effective Neovim: Instant IDE](https://youtu.be/stqUbv-5u2s), covering the
-previous version. Note: The install via init.lua is outdated, please follow the
-install instructions in this file instead. An updated video is coming soon.
-
-### Recommended Steps
-
-[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo
-(so that you have your own copy that you can modify) and then installing you
-can install to your machine using the methods above.
-
-> **NOTE**  
-> Your fork's url will be something like this: `https://github.com/<your_github_username>/kickstart.nvim.git`
-
-#### Examples of adding popularly requested plugins
-
-<details>
-  <summary>Adding autopairs</summary>
-
-This will automatically install [windwp/nvim-autopairs](https://github.com/windwp/nvim-autopairs) and enable it on startup. For more information, see documentation for [lazy.nvim](https://github.com/folke/lazy.nvim).
-
-In the file: `lua/custom/plugins/autopairs.lua`, add:
-
-```lua
--- File: lua/custom/plugins/autopairs.lua
-
-return {
-  "windwp/nvim-autopairs",
-  -- Optional dependency
-  dependencies = { 'hrsh7th/nvim-cmp' },
-  config = function()
-    require("nvim-autopairs").setup {}
-    -- If you want to automatically add `(` after selecting a function or method
-    local cmp_autopairs = require('nvim-autopairs.completion.cmp')
-    local cmp = require('cmp')
-    cmp.event:on(
-      'confirm_done',
-      cmp_autopairs.on_confirm_done()
-    )
-  end,
-}
-```
-
-</details>
-<details>
-  <summary>Adding a file tree plugin</summary>
-
-This will install the tree plugin and add the command `:Neotree` for you. You can explore the documentation at [neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim) for more information.
-
-In the file: `lua/custom/plugins/filetree.lua`, add:
-
-```lua
--- Unless you are still migrating, remove the deprecated commands from v1.x
-vim.cmd([[ let g:neo_tree_remove_legacy_commands = 1 ]])
-
-return {
-  "nvim-neo-tree/neo-tree.nvim",
-  version = "*",
-  dependencies = {
-    "nvim-lua/plenary.nvim",
-    "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended
-    "MunifTanjim/nui.nvim",
-  },
-  config = function ()
-    require('neo-tree').setup {}
-  end,
-}
-```
-
-</details>
+[The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o)
 
 ### FAQ
 
-* What should I do if I already have a pre-existing neovim configuration?
-  * You should back it up, then delete all files associated with it.
-  * This includes your existing init.lua and the neovim files in `~/.local` which can be deleted with `rm -rf ~/.local/share/nvim/`
+* What should I do if I already have a pre-existing Neovim configuration?
+  * You should back it up and then delete all associated files.
+  * This includes your existing init.lua and the Neovim files in `~/.local`
+    which can be deleted with `rm -rf ~/.local/share/nvim/`
 * Can I keep my existing configuration in parallel to kickstart?
-  * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` to maintain multiple configurations. For example you can install the kickstart configuration in `~/.config/nvim-kickstart` and create an alias:
+  * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME`
+    to maintain multiple configurations. For example, you can install the kickstart
+    configuration in `~/.config/nvim-kickstart` and create an alias:
     ```
     alias nvim-kickstart='NVIM_APPNAME="nvim-kickstart" nvim'
     ```
-    When you run Neovim using `nvim-kickstart` alias it will use the alternative config directory and the matching local directory `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim distribution that you would like to try out.
+    When you run Neovim using `nvim-kickstart` alias it will use the alternative
+    config directory and the matching local directory
+    `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim
+    distribution that you would like to try out.
 * What if I want to "uninstall" this configuration:
-  * See [lazy.nvim uninstall](https://github.com/folke/lazy.nvim#-uninstalling) information
+  * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information
 * Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files?
   * The main purpose of kickstart is to serve as a teaching tool and a reference
-    configuration that someone can easily `git clone` as a basis for their own.
+    configuration that someone can easily use to `git clone` as a basis for their own.
     As you progress in learning Neovim and Lua, you might consider splitting `init.lua`
-    into smaller parts. A fork of kickstart that does this while maintaining the exact
+    into smaller parts. A fork of kickstart that does this while maintaining the
     same functionality is available here:
     * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim)
   * Discussions on this topic can be found here:
     * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218)
     * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473)
 
-### Windows Installation
+### Install Recipes
 
-Installation may require installing build tools, and updating the run command for `telescope-fzf-native`
+Below you can find OS specific install instructions for Neovim and dependencies.
+
+After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step.
+
+#### Windows Installation
+
+<details><summary>Windows with Microsoft C++ Build Tools and CMake</summary>
+Installation may require installing build tools and updating the run command for `telescope-fzf-native`
 
 See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation)
 
 This requires:
 
-- Install CMake, and the Microsoft C++ Build Tools on Windows
+- Install CMake and the Microsoft C++ Build Tools on Windows
 
 ```lua
 {'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' }
 ```
+</details>
+<details><summary>Windows with gcc/make using chocolatey</summary>
+Alternatively, one can install gcc and make which don't require changing the config,
+the easiest way is to use choco:
+
+1. install [chocolatey](https://chocolatey.org/install)
+either follow the instructions on the page or use winget,
+run in cmd as **admin**:
+```
+winget install --accept-source-agreements chocolatey.chocolatey
+```
+
+2. install all requirements using choco, exit the previous cmd and
+open a new one so that choco path is set, and run in cmd as **admin**:
+```
+choco install -y neovim git ripgrep wget fd unzip gzip mingw make
+```
+</details>
+<details><summary>WSL (Windows Subsystem for Linux)</summary>
+
+```
+wsl --install
+wsl
+sudo add-apt-repository ppa:neovim-ppa/unstable -y
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip neovim
+```
+</details>
+
+#### Linux Install
+<details><summary>Ubuntu Install Steps</summary>
+
+```
+sudo add-apt-repository ppa:neovim-ppa/unstable -y
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip neovim
+```
+</details>
+<details><summary>Debian Install Steps</summary>
+
+```
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip curl
+
+# Now we install nvim
+curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux64.tar.gz
+sudo rm -rf /opt/nvim-linux64
+sudo mkdir -p /opt/nvim-linux64
+sudo chmod a+rX /opt/nvim-linux64
+sudo tar -C /opt -xzf nvim-linux64.tar.gz
+
+# make it available in /usr/local/bin, distro installs to /usr/bin
+sudo ln -sf /opt/nvim-linux64/bin/nvim /usr/local/bin/
+```
+</details>
+<details><summary>Fedora Install Steps</summary>
+
+```
+sudo dnf install -y gcc make git ripgrep fd-find unzip neovim
+```
+</details>
+
+<details><summary>Arch Install Steps</summary>
+
+```
+sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim
+```
+</details>
+

init.lua

@@ -29,7 +29,7 @@ What is Kickstart?
     what your configuration is doing, and modify it to suit your needs.
 
     Once you've done that, you can start exploring, configuring and tinkering to
-    make Neovim your own! That might mean leaving kickstart just the way it is for a while
+    make Neovim your own! That might mean leaving Kickstart just the way it is for a while
     or immediately breaking it into modular pieces. It's up to you!
 
     If you don't know anything about Lua, I recommend taking some time to read through
@@ -51,32 +51,32 @@ Kickstart Guide:
       - Tutor
       - <enter key>
 
-    (If you already know how the Neovim basics, you can skip this step)
+    (If you already know the Neovim basics, you can skip this step.)
 
   Once you've completed that, you can continue working through **AND READING** the rest
-  of the kickstart init.lua
+  of the kickstart init.lua.
 
   Next, run AND READ `:help`.
     This will open up a help window with some basic information
     about reading, navigating and searching the builtin help documentation.
 
     This should be the first place you go to look when you're stuck or confused
-    with something. It's one of my favorite neovim features.
+    with something. It's one of my favorite Neovim features.
 
     MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
-    which is very useful when you're not sure exactly what you're looking for.
+    which is very useful when you're not exactly sure of what you're looking for.
 
   I have left several `:help X` comments throughout the init.lua
     These are hints about where to find more information about the relevant settings,
-    plugins or neovim features used in kickstart.
+    plugins or Neovim features used in Kickstart.
 
    NOTE: Look for lines like this
 
-    Throughout the file. These are for you, the reader, to help understand what is happening.
+    Throughout the file. These are for you, the reader, to help you understand what is happening.
     Feel free to delete them once you know what you're doing, but they should serve as a guide
-    for when you are first encountering a few different constructs in your nvim config.
+    for when you are first encountering a few different constructs in your Neovim config.
 
-If you experience any errors while trying to install kickstart, run `:checkhealth` for more info
+If you experience any errors while trying to install kickstart, run `:checkhealth` for more info.
 
 I hope you enjoy your Neovim journey,
 - TJ
@@ -90,6 +90,9 @@ P.S. You can delete this when you're done too. It's your config now! :)
 vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
+-- Set to true if you have a Nerd Font installed and selected in the terminal
+vim.g.have_nerd_font = false
+
 -- [[ Setting options ]]
 -- See `:help vim.opt`
 -- NOTE: You can change these options as you wish!
@@ -97,20 +100,23 @@ vim.g.maplocalleader = ' '
 
 -- Make line numbers default
 vim.opt.number = true
--- You can also add relative line numbers, for help with jumping.
+-- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
 -- vim.opt.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
 vim.opt.mouse = 'a'
 
--- Don't show the mode, since it's already in status line
+-- Don't show the mode, since it's already in the status line
 vim.opt.showmode = false
 
 -- Sync clipboard between OS and Neovim.
+--  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
-vim.opt.clipboard = 'unnamedplus'
+vim.schedule(function()
+  vim.opt.clipboard = 'unnamedplus'
+end)
 
 -- Enable break indent
 vim.opt.breakindent = true
@@ -118,7 +124,7 @@ vim.opt.breakindent = true
 -- Save undo history
 vim.opt.undofile = true
 
--- Case-insensitive searching UNLESS \C or capital in search
+-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
 vim.opt.ignorecase = true
 vim.opt.smartcase = true
 
@@ -127,15 +133,17 @@ vim.opt.signcolumn = 'yes'
 
 -- Decrease update time
 vim.opt.updatetime = 250
+
+-- Decrease mapped sequence wait time
 vim.opt.timeoutlen = 300
 
 -- Configure how new splits should be opened
 vim.opt.splitright = true
 vim.opt.splitbelow = true
 
--- Sets how neovim will display certain whitespace in the editor.
---  See :help 'list'
---  and :help 'listchars'
+-- Sets how neovim will display certain whitespace characters in the editor.
+--  See `:help 'list'`
+--  and `:help 'listchars'`
 vim.opt.list = true
 vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
 
@@ -151,14 +159,11 @@ vim.opt.scrolloff = 10
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
 
--- Set highlight on search, but clear on pressing <Esc> in normal mode
-vim.opt.hlsearch = true
+-- Clear highlights on search when pressing <Esc> in normal mode
+--  See `:help hlsearch`
 vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 
 -- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -185,7 +190,7 @@ vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower win
 vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
 
 -- [[ Basic Autocommands ]]
---  See :help lua-guide-autocommands
+--  See `:help lua-guide-autocommands`
 
 -- Highlight when yanking (copying) text
 --  Try it with `yap` in normal mode
@@ -201,9 +206,12 @@ vim.api.nvim_create_autocmd('TextYankPost', {
 -- [[ Install `lazy.nvim` plugin manager ]]
 --    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
 local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-if not vim.loop.fs_stat(lazypath) then
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
   local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
-  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+  local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+  if vim.v.shell_error ~= 0 then
+    error('Error cloning lazy.nvim:\n' .. out)
+  end
 end ---@diagnostic disable-next-line: undefined-field
 vim.opt.rtp:prepend(lazypath)
 
@@ -214,12 +222,11 @@ vim.opt.rtp:prepend(lazypath)
 --
 --  You can press `?` in this menu for help. Use `:q` to close the window
 --
---  To update plugins, you can run
+--  To update plugins you can run
 --    :Lazy update
 --
 -- NOTE: Here is where you install your plugins.
 require('lazy').setup({
-
   -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
   'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
 
@@ -229,14 +236,9 @@ require('lazy').setup({
   --
   -- Use `opts = {}` to force a plugin to be loaded.
   --
-  --  This is equivalent to:
-  --    require('Comment').setup({})
-
-  -- "gc" to comment visual regions/lines
-  { 'numToStr/Comment.nvim', opts = {} },
 
   -- Here is a more advanced example where we pass configuration
-  -- options to `gitsigns.nvim`. This is equivalent to the following lua:
+  -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
   --    require('gitsigns').setup({ ... })
   --
   -- See `:help gitsigns` to understand what the configuration keys do
@@ -253,36 +255,75 @@ require('lazy').setup({
     },
   },
 
-  -- NOTE: Plugins can also be configured to run lua code when they are loaded.
+  -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
   --
   -- This is often very useful to both group configuration, as well as handle
   -- lazy loading plugins that don't need to be loaded immediately at startup.
   --
   -- For example, in the following configuration, we use:
-  --  event = 'VeryLazy'
+  --  event = 'VimEnter'
   --
-  -- which loads which-key after all the UI elements are loaded. Events can be
-  -- normal autocommands events (:help autocomd-events).
+  -- which loads which-key before all the UI elements are loaded. Events can be
+  -- normal autocommands events (`:help autocmd-events`).
   --
-  -- Then, because we use the `config` key, the configuration only runs
-  -- after the plugin has been loaded:
-  --  config = function() ... end
+  -- Then, because we use the `opts` key (recommended), the configuration runs
+  -- after the plugin has been loaded as `require(MODULE).setup(opts)`.
 
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
-    event = 'VeryLazy', -- Sets the loading event to 'VeryLazy'
-    config = function() -- This is the function that runs, AFTER loading
-      require('which-key').setup()
+    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
+    opts = {
+      -- delay between pressing a key and opening which-key (milliseconds)
+      -- this setting is independent of vim.opt.timeoutlen
+      delay = 0,
+      icons = {
+        -- set icon mappings to true if you have a Nerd Font
+        mappings = vim.g.have_nerd_font,
+        -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
+        -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
+        keys = vim.g.have_nerd_font and {} or {
+          Up = '<Up> ',
+          Down = '<Down> ',
+          Left = '<Left> ',
+          Right = '<Right> ',
+          C = '<C-…> ',
+          M = '<M-…> ',
+          D = '<D-…> ',
+          S = '<S-…> ',
+          CR = '<CR> ',
+          Esc = '<Esc> ',
+          ScrollWheelDown = '<ScrollWheelDown> ',
+          ScrollWheelUp = '<ScrollWheelUp> ',
+          NL = '<NL> ',
+          BS = '<BS> ',
+          Space = '<Space> ',
+          Tab = '<Tab> ',
+          F1 = '<F1>',
+          F2 = '<F2>',
+          F3 = '<F3>',
+          F4 = '<F4>',
+          F5 = '<F5>',
+          F6 = '<F6>',
+          F7 = '<F7>',
+          F8 = '<F8>',
+          F9 = '<F9>',
+          F10 = '<F10>',
+          F11 = '<F11>',
+          F12 = '<F12>',
+        },
+      },
 
       -- Document existing key chains
-      require('which-key').register {
-        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
-        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
-        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
-        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
-        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
-      }
-    end,
+      spec = {
+        { '<leader>c', group = '[C]ode', mode = { 'n', 'x' } },
+        { '<leader>d', group = '[D]ocument' },
+        { '<leader>r', group = '[R]ename' },
+        { '<leader>s', group = '[S]earch' },
+        { '<leader>w', group = '[W]orkspace' },
+        { '<leader>t', group = '[T]oggle' },
+        { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
+      },
+    },
   },
 
   -- NOTE: Plugins can specify dependencies.
@@ -294,11 +335,11 @@ require('lazy').setup({
 
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
-    event = 'VeryLazy',
+    event = 'VimEnter',
     branch = '0.1.x',
     dependencies = {
       'nvim-lua/plenary.nvim',
-      { -- If encountering errors, see telescope-fzf-native README for install instructions
+      { -- If encountering errors, see telescope-fzf-native README for installation instructions
         'nvim-telescope/telescope-fzf-native.nvim',
 
         -- `build` is used to run some command when the plugin is installed/updated.
@@ -313,29 +354,27 @@ require('lazy').setup({
       },
       { 'nvim-telescope/telescope-ui-select.nvim' },
 
-      -- Useful for getting pretty icons, but requires special font.
-      --  If you already have a Nerd Font, or terminal set up with fallback fonts
-      --  you can enable this
-      -- { 'nvim-tree/nvim-web-devicons' }
+      -- Useful for getting pretty icons, but requires a Nerd Font.
+      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
     },
     config = function()
       -- Telescope is a fuzzy finder that comes with a lot of different things that
       -- it can fuzzy find! It's more than just a "file finder", it can search
       -- many different aspects of Neovim, your workspace, LSP, and more!
       --
-      -- The easiest way to use telescope, is to start by doing something like:
+      -- The easiest way to use Telescope, is to start by doing something like:
       --  :Telescope help_tags
       --
       -- After running this command, a window will open up and you're able to
-      -- type in the prompt window. You'll see a list of help_tags options and
+      -- type in the prompt window. You'll see a list of `help_tags` options and
       -- a corresponding preview of the help.
       --
-      -- Two important keymaps to use while in telescope are:
+      -- Two important keymaps to use while in Telescope are:
       --  - Insert mode: <c-/>
       --  - Normal mode: ?
       --
       -- This opens a window that shows you all of the keymaps for the current
-      -- telescope picker. This is really useful to discover what Telescope can
+      -- Telescope picker. This is really useful to discover what Telescope can
       -- do as well as how to actually do it!
 
       -- [[ Configure Telescope ]]
@@ -357,7 +396,7 @@ require('lazy').setup({
         },
       }
 
-      -- Enable telescope extensions, if they are installed
+      -- Enable Telescope extensions if they are installed
       pcall(require('telescope').load_extension, 'fzf')
       pcall(require('telescope').load_extension, 'ui-select')
 
@@ -376,14 +415,14 @@ require('lazy').setup({
 
       -- Slightly advanced example of overriding default behavior and theme
       vim.keymap.set('n', '<leader>/', function()
-        -- You can pass additional configuration to telescope to change theme, layout, etc.
+        -- You can pass additional configuration to Telescope to change the theme, layout, etc.
         builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
           winblend = 10,
           previewer = false,
         })
       end, { desc = '[/] Fuzzily search in current buffer' })
 
-      -- Also possible to pass additional configuration options.
+      -- It's also possible to pass additional configuration options.
       --  See `:help telescope.builtin.live_grep()` for information about particular keys
       vim.keymap.set('n', '<leader>s/', function()
         builtin.live_grep {
@@ -392,35 +431,53 @@ require('lazy').setup({
         }
       end, { desc = '[S]earch [/] in Open Files' })
 
-      -- Shortcut for searching your neovim configuration files
+      -- Shortcut for searching your Neovim configuration files
       vim.keymap.set('n', '<leader>sn', function()
         builtin.find_files { cwd = vim.fn.stdpath 'config' }
       end, { desc = '[S]earch [N]eovim files' })
     end,
   },
 
-  { -- LSP Configuration & Plugins
+  -- LSP Plugins
+  {
+    -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
+    -- used for completion, annotations and signatures of Neovim apis
+    'folke/lazydev.nvim',
+    ft = 'lua',
+    opts = {
+      library = {
+        -- Load luvit types when the `vim.uv` word is found
+        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
+      },
+    },
+  },
+  {
+    -- Main LSP Configuration
     'neovim/nvim-lspconfig',
     dependencies = {
-      -- Automatically install LSPs and related tools to stdpath for neovim
-      'williamboman/mason.nvim',
+      -- Automatically install LSPs and related tools to stdpath for Neovim
+      -- Mason must be loaded before its dependents so we need to set it up here.
+      -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
+      { 'williamboman/mason.nvim', opts = {} },
       'williamboman/mason-lspconfig.nvim',
       'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
-      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
+
+      -- Allows extra capabilities provided by nvim-cmp
+      'hrsh7th/cmp-nvim-lsp',
     },
     config = function()
-      -- Brief Aside: **What is LSP?**
+      -- Brief aside: **What is LSP?**
       --
-      -- LSP is an acronym you've probably heard, but might not understand what it is.
+      -- LSP is an initialism you've probably heard, but might not understand what it is.
       --
       -- LSP stands for Language Server Protocol. It's a protocol that helps editors
       -- and language tooling communicate in a standardized fashion.
       --
       -- In general, you have a "server" which is some tool built to understand a particular
-      -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc). These Language Servers
+      -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
       -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
       -- processes that communicate with some "client" - in this case, Neovim!
       --
@@ -435,7 +492,7 @@ require('lazy').setup({
       -- Neovim. This is where `mason` and related plugins come into play.
       --
       -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
-      -- and elegantly composed help section, :help lsp-vs-treesitter
+      -- and elegantly composed help section, `:help lsp-vs-treesitter`
 
       --  This function gets run when an LSP attaches to a particular buffer.
       --    That is to say, every time a new file is opened that is associated with
@@ -444,19 +501,19 @@ require('lazy').setup({
       vim.api.nvim_create_autocmd('LspAttach', {
         group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
         callback = function(event)
-          -- NOTE: Remember that lua is a real programming language, and as such it is possible
-          -- to define small helper and utility functions so you don't have to repeat yourself
-          -- many times.
+          -- NOTE: Remember that Lua is a real programming language, and as such it is possible
+          -- to define small helper and utility functions so you don't have to repeat yourself.
           --
           -- In this case, we create a function that lets us more easily define mappings specific
           -- for LSP related items. It sets the mode, buffer and description for us each time.
-          local map = function(keys, func, desc)
-            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+          local map = function(keys, func, desc, mode)
+            mode = mode or 'n'
+            vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
           end
 
           -- Jump to the definition of the word under your cursor.
           --  This is where a variable was first declared, or where a function is defined, etc.
-          --  To jump back, press <C-T>.
+          --  To jump back, press <C-t>.
           map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
 
           -- Find references for the word under your cursor.
@@ -475,24 +532,20 @@ require('lazy').setup({
           --  Symbols are things like variables, functions, types, etc.
           map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
 
-          -- Fuzzy find all the symbols in your current workspace
-          --  Similar to document symbols, except searches over your whole project.
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
           map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
 
-          -- Rename the variable under your cursor
+          -- Rename the variable under your cursor.
           --  Most Language Servers support renaming across files, etc.
           map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
 
           -- Execute a code action, usually your cursor needs to be on top of an error
           -- or a suggestion from your LSP for this to activate.
-          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
-
-          -- Opens a popup that displays documentation about the word under your cursor
-          --  See `:help K` for why this keymap
-          map('K', vim.lsp.buf.hover, 'Hover Documentation')
+          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction', { 'n', 'x' })
 
           -- WARN: This is not Goto Definition, this is Goto Declaration.
-          --  For example, in C this would take you to the header
+          --  For example, in C this would take you to the header.
           map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
           -- The following two autocommands are used to highlight references of the
@@ -501,22 +554,53 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client.server_capabilities.documentHighlightProvider then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
+            local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
+              group = highlight_augroup,
               callback = vim.lsp.buf.document_highlight,
             })
 
             vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
               buffer = event.buf,
+              group = highlight_augroup,
               callback = vim.lsp.buf.clear_references,
             })
+
+            vim.api.nvim_create_autocmd('LspDetach', {
+              group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
+              callback = function(event2)
+                vim.lsp.buf.clear_references()
+                vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
+              end,
+            })
+          end
+
+          -- The following code creates a keymap to toggle inlay hints in your
+          -- code, if the language server you are using supports them
+          --
+          -- This may be unwanted, since they displace some of your code
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
+            map('<leader>th', function()
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
+            end, '[T]oggle Inlay [H]ints')
           end
         end,
       })
 
+      -- Change diagnostic symbols in the sign column (gutter)
+      -- if vim.g.have_nerd_font then
+      --   local signs = { ERROR = '', WARN = '', INFO = '', HINT = '' }
+      --   local diagnostic_signs = {}
+      --   for type, icon in pairs(signs) do
+      --     diagnostic_signs[vim.diagnostic.severity[type]] = icon
+      --   end
+      --   vim.diagnostic.config { signs = { text = diagnostic_signs } }
+      -- end
+
       -- LSP servers and clients are able to communicate to each other what features they support.
-      --  By default, Neovim doesn't support everything that is in the LSP Specification.
+      --  By default, Neovim doesn't support everything that is in the LSP specification.
       --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
       --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
       local capabilities = vim.lsp.protocol.make_client_capabilities()
@@ -541,27 +625,18 @@ require('lazy').setup({
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
-        -- But for many setups, the LSP (`tsserver`) will work just fine
-        -- tsserver = {},
+        -- But for many setups, the LSP (`ts_ls`) will work just fine
+        -- ts_ls = {},
         --
 
         lua_ls = {
-          -- cmd = {...},
-          -- filetypes { ...},
+          -- cmd = { ... },
+          -- filetypes = { ... },
           -- capabilities = {},
           settings = {
             Lua = {
-              runtime = { version = 'LuaJIT' },
-              workspace = {
-                checkThirdParty = false,
-                -- Tells lua_ls where to find all the Lua files that you have loaded
-                -- for your neovim configuration.
-                library = {
-                  '${3rd}/luv/library',
-                  unpack(vim.api.nvim_get_runtime_file('', true)),
-                },
-                -- If lua_ls is really slow on your computer, you can try this instead:
-                -- library = { vim.env.VIMRUNTIME },
+              completion = {
+                callSnippet = 'Replace',
               },
               -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
               -- diagnostics = { disable = { 'missing-fields' } },
@@ -571,18 +646,21 @@ require('lazy').setup({
       }
 
       -- Ensure the servers and tools above are installed
-      --  To check the current status of installed tools and/or manually install
-      --  other tools, you can run
+      --
+      -- To check the current status of installed tools and/or manually install
+      -- other tools, you can run
       --    :Mason
       --
-      --  You can press `g?` for help in this menu
-      require('mason').setup()
-
+      -- You can press `g?` for help in this menu.
+      --
+      -- `mason` had to be setup earlier: to configure its options see the
+      -- `dependencies` table for `nvim-lspconfig` above.
+      --
       -- You can add other tools here that you want Mason to install
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
-        'stylua', -- Used to format lua code
+        'stylua', -- Used to format Lua code
       })
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
@@ -590,15 +668,11 @@ require('lazy').setup({
         handlers = {
           function(server_name)
             local server = servers[server_name] or {}
-            require('lspconfig')[server_name].setup {
-              cmd = server.cmd,
-              settings = server.settings,
-              filetypes = server.filetypes,
-              -- This handles overriding only values explicitly passed
-              -- by the server configuration above. Useful when disabling
-              -- certain features of an LSP (for example, turning off formatting for tsserver)
-              capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}),
-            }
+            -- This handles overriding only values explicitly passed
+            -- by the server configuration above. Useful when disabling
+            -- certain features of an LSP (for example, turning off formatting for ts_ls)
+            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+            require('lspconfig')[server_name].setup(server)
           end,
         },
       }
@@ -607,20 +681,43 @@ require('lazy').setup({
 
   { -- Autoformat
     'stevearc/conform.nvim',
+    event = { 'BufWritePre' },
+    cmd = { 'ConformInfo' },
+    keys = {
+      {
+        '<leader>f',
+        function()
+          require('conform').format { async = true, lsp_format = 'fallback' }
+        end,
+        mode = '',
+        desc = '[F]ormat buffer',
+      },
+    },
     opts = {
       notify_on_error = false,
-      format_on_save = {
-        timeout_ms = 500,
-        lsp_fallback = true,
-      },
+      format_on_save = function(bufnr)
+        -- Disable "format_on_save lsp_fallback" for languages that don't
+        -- have a well standardized coding style. You can add additional
+        -- languages here or re-enable it for the disabled ones.
+        local disable_filetypes = { c = true, cpp = true }
+        local lsp_format_opt
+        if disable_filetypes[vim.bo[bufnr].filetype] then
+          lsp_format_opt = 'never'
+        else
+          lsp_format_opt = 'fallback'
+        end
+        return {
+          timeout_ms = 500,
+          lsp_format = lsp_format_opt,
+        }
+      end,
       formatters_by_ft = {
         lua = { 'stylua' },
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
-        -- You can use a sub-list to tell conform to run *until* a formatter
-        -- is found.
-        -- javascript = { { "prettierd", "prettier" } },
+        -- You can use 'stop_after_first' to run the first available formatter from the list
+        -- javascript = { "prettierd", "prettier", stop_after_first = true },
       },
     },
   },
@@ -633,14 +730,25 @@ require('lazy').setup({
       {
         'L3MON4D3/LuaSnip',
         build = (function()
-          -- Build Step is needed for regex support in snippets
-          -- This step is not supported in many windows environments
-          -- Remove the below condition to re-enable on windows
+          -- Build Step is needed for regex support in snippets.
+          -- This step is not supported in many windows environments.
+          -- Remove the below condition to re-enable on windows.
           if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
             return
           end
           return 'make install_jsregexp'
         end)(),
+        dependencies = {
+          -- `friendly-snippets` contains a variety of premade snippets.
+          --    See the README about individual language/framework/plugin snippets:
+          --    https://github.com/rafamadriz/friendly-snippets
+          -- {
+          --   'rafamadriz/friendly-snippets',
+          --   config = function()
+          --     require('luasnip.loaders.from_vscode').lazy_load()
+          --   end,
+          -- },
+        },
       },
       'saadparwaiz1/cmp_luasnip',
 
@@ -649,12 +757,6 @@ require('lazy').setup({
       --  into multiple repos for maintenance purposes.
       'hrsh7th/cmp-nvim-lsp',
       'hrsh7th/cmp-path',
-
-      -- If you want to add a bunch of pre-configured snippets,
-      --    you can use this plugin to help you. It even has snippets
-      --    for various frameworks/libraries/etc. but you will have to
-      --    set up the ones that are useful for you.
-      -- 'rafamadriz/friendly-snippets',
     },
     config = function()
       -- See `:help cmp`
@@ -680,11 +782,21 @@ require('lazy').setup({
           -- Select the [p]revious item
           ['<C-p>'] = cmp.mapping.select_prev_item(),
 
+          -- Scroll the documentation window [b]ack / [f]orward
+          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+
           -- Accept ([y]es) the completion.
           --  This will auto-import if your LSP supports it.
           --  This will expand snippets if the LSP sent a snippet.
           ['<C-y>'] = cmp.mapping.confirm { select = true },
 
+          -- If you prefer more traditional completion keymaps,
+          -- you can uncomment the following lines
+          --['<CR>'] = cmp.mapping.confirm { select = true },
+          --['<Tab>'] = cmp.mapping.select_next_item(),
+          --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+
           -- Manually trigger a completion from nvim-cmp.
           --  Generally you don't need this, because nvim-cmp will display
           --  completions whenever it has completion options available.
@@ -708,8 +820,16 @@ require('lazy').setup({
               luasnip.jump(-1)
             end
           end, { 'i', 's' }),
+
+          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
         },
         sources = {
+          {
+            name = 'lazydev',
+            -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
+            group_index = 0,
+          },
           { name = 'nvim_lsp' },
           { name = 'luasnip' },
           { name = 'path' },
@@ -720,23 +840,24 @@ require('lazy').setup({
 
   { -- You can easily change to a different colorscheme.
     -- Change the name of the colorscheme plugin below, and then
-    -- change the command in the config to whatever the name of that colorscheme is
+    -- change the command in the config to whatever the name of that colorscheme is.
     --
-    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`
+    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
     'folke/tokyonight.nvim',
-    lazy = false, -- make sure we load this during startup if it is your main colorscheme
-    priority = 1000, -- make sure to load this before all the other start plugins
-    config = function()
-      -- Load the colorscheme here
+    priority = 1000, -- Make sure to load this before all the other start plugins.
+    init = function()
+      -- Load the colorscheme here.
+      -- Like many other themes, this one has different styles, and you could load
+      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
       vim.cmd.colorscheme 'tokyonight-night'
 
-      -- You can configure highlights by doing something like
+      -- You can configure highlights by doing something like:
       vim.cmd.hi 'Comment gui=none'
     end,
   },
 
   -- Highlight todo, notes, etc in comments
-  { 'folke/todo-comments.nvim', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
+  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
 
   { -- Collection of various small independent plugins/modules
     'echasnovski/mini.nvim',
@@ -744,8 +865,8 @@ require('lazy').setup({
       -- Better Around/Inside textobjects
       --
       -- Examples:
-      --  - va)  - [V]isually select [A]round [)]parenthen
-      --  - yinq - [Y]ank [I]nside [N]ext [']quote
+      --  - va)  - [V]isually select [A]round [)]paren
+      --  - yinq - [Y]ank [I]nside [N]ext [Q]uote
       --  - ci'  - [C]hange [I]nside [']quote
       require('mini.ai').setup { n_lines = 500 }
 
@@ -759,56 +880,95 @@ require('lazy').setup({
       -- Simple and easy statusline.
       --  You could remove this setup call if you don't like it,
       --  and try some other statusline plugin
-      require('mini.statusline').setup()
+      local statusline = require 'mini.statusline'
+      -- set use_icons to true if you have a Nerd Font
+      statusline.setup { use_icons = vim.g.have_nerd_font }
+
+      -- You can configure sections in the statusline by overriding their
+      -- default behavior. For example, here we set the section for
+      -- cursor location to LINE:COLUMN
+      ---@diagnostic disable-next-line: duplicate-set-field
+      statusline.section_location = function()
+        return '%2l:%-2v'
+      end
 
       -- ... and there is more!
       --  Check out: https://github.com/echasnovski/mini.nvim
     end,
   },
-
   { -- Highlight, edit, and navigate code
     'nvim-treesitter/nvim-treesitter',
     build = ':TSUpdate',
-    config = function()
-      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
-
-      ---@diagnostic disable-next-line: missing-fields
-      require('nvim-treesitter.configs').setup {
-        ensure_installed = { 'bash', 'c', 'html', 'lua', 'markdown', 'vim', 'vimdoc' },
-        -- Autoinstall languages that are not installed
-        auto_install = true,
-        highlight = { enable = true },
-        indent = { enable = true },
-      }
-
-      -- There are additional nvim-treesitter modules that you can use to interact
-      -- with nvim-treesitter. You should go explore a few and see what interests you:
-      --
-      --    - Incremental selection: Included, see :help nvim-treesitter-incremental-selection-mod
-      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
-      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
-    end,
+    main = 'nvim-treesitter.configs', -- Sets main module to use for opts
+    -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+    opts = {
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
+      -- Autoinstall languages that are not installed
+      auto_install = true,
+      highlight = {
+        enable = true,
+        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+        --  If you are experiencing weird indenting issues, add the language to
+        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
+        additional_vim_regex_highlighting = { 'ruby' },
+      },
+      indent = { enable = true, disable = { 'ruby' } },
+    },
+    -- There are additional nvim-treesitter modules that you can use to interact
+    -- with nvim-treesitter. You should go explore a few and see what interests you:
+    --
+    --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+    --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+    --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
   },
 
-  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the
   -- init.lua. If you want these files, they are in the repository, so you can just download them and
-  -- put them in the right spots if you want.
+  -- place them in the correct locations.
 
-  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart
+  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
   --
-  --  Here are some example plugins that I've included in the kickstart repository.
+  --  Here are some example plugins that I've included in the Kickstart repository.
   --  Uncomment any of the lines below to enable them (you will need to restart nvim).
   --
   -- require 'kickstart.plugins.debug',
   -- require 'kickstart.plugins.indent_line',
+  -- require 'kickstart.plugins.lint',
+  -- require 'kickstart.plugins.autopairs',
+  -- require 'kickstart.plugins.neo-tree',
+  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
-  --    For additional information see: :help lazy.nvim-lazy.nvim-structuring-your-plugins
   -- { import = 'custom.plugins' },
-}, {})
+  --
+  -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
+  -- Or use telescope!
+  -- In normal mode type `<space>sh` then write `lazy.nvim-plugin`
+  -- you can continue same window with `<space>sr` which resumes last telescope search
+}, {
+  ui = {
+    -- If you are using a Nerd Font: set icons to an empty table which will use the
+    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
+    icons = vim.g.have_nerd_font and {} or {
+      cmd = '⌘',
+      config = '🛠',
+      event = '📅',
+      ft = '📂',
+      init = '⚙',
+      keys = '🗝',
+      plugin = '🔌',
+      runtime = '💻',
+      require = '🌙',
+      source = '📄',
+      start = '🚀',
+      task = '📌',
+      lazy = '💤 ',
+    },
+  },
+})
 
 -- The line beneath this is called `modeline`. See `:help modeline`
 -- vim: ts=2 sts=2 sw=2 et

lua/kickstart/health.lua

@@ -6,15 +6,16 @@
 --]]
 
 local check_version = function()
-  if not vim.version.cmp then
-    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", tostring(vim.version())))
+  local verstr = tostring(vim.version())
+  if not vim.version.ge then
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
     return
   end
 
-  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
-    vim.health.ok(string.format("Neovim version is: '%s'", tostring(vim.version())))
+  if vim.version.ge(vim.version(), '0.10-dev') then
+    vim.health.ok(string.format("Neovim version is: '%s'", verstr))
   else
-    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", tostring(vim.version())))
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
   end
 end
 

lua/kickstart/plugins/autopairs.lua

@@ -0,0 +1,16 @@
+-- autopairs
+-- https://github.com/windwp/nvim-autopairs
+
+return {
+  'windwp/nvim-autopairs',
+  event = 'InsertEnter',
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require('nvim-autopairs').setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require 'nvim-autopairs.completion.cmp'
+    local cmp = require 'cmp'
+    cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done())
+  end,
+}

lua/kickstart/plugins/debug.lua

@@ -14,6 +14,9 @@ return {
     -- Creates a beautiful debugger UI
     'rcarriga/nvim-dap-ui',
 
+    -- Required dependency for nvim-dap-ui
+    'nvim-neotest/nvim-nio',
+
     -- Installs the debug adapters for you
     'williamboman/mason.nvim',
     'jay-babu/mason-nvim-dap.nvim',
@@ -21,6 +24,59 @@ return {
     -- Add your own debuggers here
     'leoluz/nvim-dap-go',
   },
+  keys = {
+    -- Basic debugging keymaps, feel free to change to your liking!
+    {
+      '<F5>',
+      function()
+        require('dap').continue()
+      end,
+      desc = 'Debug: Start/Continue',
+    },
+    {
+      '<F1>',
+      function()
+        require('dap').step_into()
+      end,
+      desc = 'Debug: Step Into',
+    },
+    {
+      '<F2>',
+      function()
+        require('dap').step_over()
+      end,
+      desc = 'Debug: Step Over',
+    },
+    {
+      '<F3>',
+      function()
+        require('dap').step_out()
+      end,
+      desc = 'Debug: Step Out',
+    },
+    {
+      '<leader>b',
+      function()
+        require('dap').toggle_breakpoint()
+      end,
+      desc = 'Debug: Toggle Breakpoint',
+    },
+    {
+      '<leader>B',
+      function()
+        require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+      end,
+      desc = 'Debug: Set Breakpoint',
+    },
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    {
+      '<F7>',
+      function()
+        require('dapui').toggle()
+      end,
+      desc = 'Debug: See last session result.',
+    },
+  },
   config = function()
     local dap = require 'dap'
     local dapui = require 'dapui'
@@ -28,7 +84,7 @@ return {
     require('mason-nvim-dap').setup {
       -- Makes a best effort to setup the various debuggers with
       -- reasonable debug configurations
-      automatic_setup = true,
+      automatic_installation = true,
 
       -- You can provide additional configuration to the handlers,
       -- see mason-nvim-dap README for more information
@@ -42,16 +98,6 @@ return {
       },
     }
 
-    -- Basic debugging keymaps, feel free to change to your liking!
-    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
-    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
-    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
-    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
-    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
-    vim.keymap.set('n', '<leader>B', function()
-      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
-    end, { desc = 'Debug: Set Breakpoint' })
-
     -- Dap UI setup
     -- For more information, see |:help nvim-dap-ui|
     dapui.setup {
@@ -74,14 +120,29 @@ return {
       },
     }
 
-    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
-    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+    -- Change breakpoint icons
+    -- vim.api.nvim_set_hl(0, 'DapBreak', { fg = '#e51400' })
+    -- vim.api.nvim_set_hl(0, 'DapStop', { fg = '#ffcc00' })
+    -- local breakpoint_icons = vim.g.have_nerd_font
+    --     and { Breakpoint = '', BreakpointCondition = '', BreakpointRejected = '', LogPoint = '', Stopped = '' }
+    --   or { Breakpoint = '●', BreakpointCondition = '⊜', BreakpointRejected = '⊘', LogPoint = '◆', Stopped = '⭔' }
+    -- for type, icon in pairs(breakpoint_icons) do
+    --   local tp = 'Dap' .. type
+    --   local hl = (type == 'Stopped') and 'DapStop' or 'DapBreak'
+    --   vim.fn.sign_define(tp, { text = icon, texthl = hl, numhl = hl })
+    -- end
 
     dap.listeners.after.event_initialized['dapui_config'] = dapui.open
     dap.listeners.before.event_terminated['dapui_config'] = dapui.close
     dap.listeners.before.event_exited['dapui_config'] = dapui.close
 
     -- Install golang specific config
-    require('dap-go').setup()
+    require('dap-go').setup {
+      delve = {
+        -- On Windows delve must be run attached or it crashes.
+        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
+        detached = vim.fn.has 'win32' == 0,
+      },
+    }
   end,
 }

lua/kickstart/plugins/gitsigns.lua

@@ -0,0 +1,61 @@
+-- Adds git related signs to the gutter, as well as utilities for managing changes
+-- NOTE: gitsigns is already included in init.lua but contains only the base
+-- config. This will add also the recommended keymaps.
+
+return {
+  {
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      on_attach = function(bufnr)
+        local gitsigns = require 'gitsigns'
+
+        local function map(mode, l, r, opts)
+          opts = opts or {}
+          opts.buffer = bufnr
+          vim.keymap.set(mode, l, r, opts)
+        end
+
+        -- Navigation
+        map('n', ']c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { ']c', bang = true }
+          else
+            gitsigns.nav_hunk 'next'
+          end
+        end, { desc = 'Jump to next git [c]hange' })
+
+        map('n', '[c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { '[c', bang = true }
+          else
+            gitsigns.nav_hunk 'prev'
+          end
+        end, { desc = 'Jump to previous git [c]hange' })
+
+        -- Actions
+        -- visual mode
+        map('v', '<leader>hs', function()
+          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'git [s]tage hunk' })
+        map('v', '<leader>hr', function()
+          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'git [r]eset hunk' })
+        -- normal mode
+        map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
+        map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
+        map('n', '<leader>hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' })
+        map('n', '<leader>hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' })
+        map('n', '<leader>hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' })
+        map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
+        map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
+        map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
+        map('n', '<leader>hD', function()
+          gitsigns.diffthis '@'
+        end, { desc = 'git [D]iff against last commit' })
+        -- Toggles
+        map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
+        map('n', '<leader>tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' })
+      end,
+    },
+  },
+}

lua/kickstart/plugins/lint.lua

@@ -0,0 +1,60 @@
+return {
+
+  { -- Linting
+    'mfussenegger/nvim-lint',
+    event = { 'BufReadPre', 'BufNewFile' },
+    config = function()
+      local lint = require 'lint'
+      lint.linters_by_ft = {
+        markdown = { 'markdownlint' },
+      }
+
+      -- To allow other plugins to add linters to require('lint').linters_by_ft,
+      -- instead set linters_by_ft like this:
+      -- lint.linters_by_ft = lint.linters_by_ft or {}
+      -- lint.linters_by_ft['markdown'] = { 'markdownlint' }
+      --
+      -- However, note that this will enable a set of default linters,
+      -- which will cause errors unless these tools are available:
+      -- {
+      --   clojure = { "clj-kondo" },
+      --   dockerfile = { "hadolint" },
+      --   inko = { "inko" },
+      --   janet = { "janet" },
+      --   json = { "jsonlint" },
+      --   markdown = { "vale" },
+      --   rst = { "vale" },
+      --   ruby = { "ruby" },
+      --   terraform = { "tflint" },
+      --   text = { "vale" }
+      -- }
+      --
+      -- You can disable the default linters by setting their filetypes to nil:
+      -- lint.linters_by_ft['clojure'] = nil
+      -- lint.linters_by_ft['dockerfile'] = nil
+      -- lint.linters_by_ft['inko'] = nil
+      -- lint.linters_by_ft['janet'] = nil
+      -- lint.linters_by_ft['json'] = nil
+      -- lint.linters_by_ft['markdown'] = nil
+      -- lint.linters_by_ft['rst'] = nil
+      -- lint.linters_by_ft['ruby'] = nil
+      -- lint.linters_by_ft['terraform'] = nil
+      -- lint.linters_by_ft['text'] = nil
+
+      -- Create autocommand which carries out the actual linting
+      -- on the specified events.
+      local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true })
+      vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
+        group = lint_augroup,
+        callback = function()
+          -- Only run the linter in buffers that you can modify in order to
+          -- avoid superfluous noise, notably within the handy LSP pop-ups that
+          -- describe the hovered symbol using Markdown.
+          if vim.opt_local.modifiable:get() then
+            lint.try_lint()
+          end
+        end,
+      })
+    end,
+  },
+}

lua/kickstart/plugins/neo-tree.lua

@@ -0,0 +1,25 @@
+-- Neo-tree is a Neovim plugin to browse the file system
+-- https://github.com/nvim-neo-tree/neo-tree.nvim
+
+return {
+  'nvim-neo-tree/neo-tree.nvim',
+  version = '*',
+  dependencies = {
+    'nvim-lua/plenary.nvim',
+    'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
+    'MunifTanjim/nui.nvim',
+  },
+  cmd = 'Neotree',
+  keys = {
+    { '\\', ':Neotree reveal<CR>', desc = 'NeoTree reveal', silent = true },
+  },
+  opts = {
+    filesystem = {
+      window = {
+        mappings = {
+          ['\\'] = 'close_window',
+        },
+      },
+    },
+  },
+}